Buffalo WLI2-PCI-G54S Quick Setup Manual page 11

For detailed instructions on using Buffalo's Client Manager, please refer to the
Wireless PCI Adapter Manual, located on the Air Navigator CD in the MANUAL
folder. To quickly connect to an available access point double click on its icon,
select the survey screen, select the proper wireless network and press the
'Connect' button. This will connect you to the Access Point, you may be required
to enter encryption settings to properly connect.
Depending on the operating system, some screens may vary from those shown
in this guide. However, by accepting default installation settings, Client Manager
should properly install. For more information about configuring and operating
your Wireless 54Mbps Desktop PCI Adapter and Client Manager, refer to the
AirStation Wireless PCI Adapter Manual, located on the Air Navigator CD in
the MANUAL folder.
Client Manager Installation
◗ Press the Exit button to
exit the Client Manager
installation utility.
◗ The Buffalo Client
Manager is now installed
and running, right clicking on
its icon (the black notebook
icon) will allow you to begin
using it.
11