Pptp Server Setup - Buffalo AirStation WZR-RS-G54 Setup Manual

PPTP Server Setup

The PPTP Server Setup is required
if you wish to utilize the features of
the "Network Service List".
To utilize the feature select
'Enable'.
Select the type of authentication
desired. The default setting of
"MS-CHAPv2-MPPE-40/128" is
supported by all Microsoft dial up
clients. This is the recommended
setting.
Input the IP Address of the LAN port in the 'Local IP Address' field. The LAN port
default setting is 192.168.12.1. (This field is required.)
Set the range of IP Addresses to supply to VPN Clients in the 'Remote IP Address'
fields. This can be the same range as the DHCP server or you can set a separate
range specifically for the VPN Clients. (This field is required.)
If desired, add a WINS Server Address in the 'WINS Server Address' field. (This field
can be left blank.)
If desired, add a DNS Server IP Address in the 'DNS Server Address' field. It is
recommended to add the DNS Server info if in an Active Directory Domain. (This field
can be left blank.)
If you wish to restrict inbound connections based on the Remote IP Address click on
'Enable' in the 'Enforce Address Restriction' field. After pressing 'Apply', scroll to
the bottom of the page to register the allowable addresses.
Press 'Apply' to register your settings in the router.
3