Network Connection - Wireless; Network Connection - Wired - Samsung 6 Series User Manual

You can set up your TV so that it can access the SMART TV applications through your local area network
(LAN) using a wired or wireless connection.

Network Connection - Wireless

You can connect your TV to your LAN through a standard wireless router or modem.
The LAN Port on
the Wall
This TV supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using
IEEE 802.11n. When you play video over a network connection, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices that access the
network through an access point or wireless router (typically a wireless IP Sharer) to transmit an encrypted
security code called an access key.
If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP or
TKIP for your wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi
certification specifications.

Network Connection - Wired

There are two main ways to connect your TV to your network using cable, depending on your network
setup. They are illustrated below:
The Modem Port on the Wall
The LAN Port on the Wall
It is not supported when the network speed is below or equal to 10Mbps.
✎
Use Cat 6(*STP Type) cable for the connection.
✎
*Shielded Twist Pair
Network Connection
Wireless IP sharer
(Router having DHCP server)
LAN Cable (Not Supplied)
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable (Not Supplied)
LAN Cable (Not Supplied)
English - 13
TV
TV Rear Panel
LAN Cable (Not Supplied)
TV Rear Panel
v