Notes On Voice Prompts - Sennheiser CX 120 BT Instruction Manual

Product overview
6 | CX 120BT
LED
lights up red
lights up blue
flashes blue
flashes red-blue are in Bluetooth pairing mode
flashes blue
flashes red
flashes blue
flashes red
During phone calls
LED
flashes purple
flashes red
If the LED does not light up immediately during charging, clean
the charging contacts and charge the headphones until the
LED lights up again

Notes on voice prompts

The headphones output voice prompts for the following functions.
Using the Smart Control app, you can change the language of the
voice prompts, choose between voice prompts and beep sounds, or
deactivate the status messages with a few exceptions (e.g.
rechargeable battery is empty).
Voice prompt
"Power on"
"Power off"
"Device (1) (2) connected"
"Lost connection"
"Pairing"
"Pairing successful"
"Pairing failed"
"Call rejected"
"Call ended"
"Redialing"
"Voice dialing"
Meaning; the headphones
are being charged
are fully charged
are switched on
Bluetooth pairing successful
Bluetooth pairing failed
are connected to a device via Blue-
tooth
are switched off
Meaning
Incoming call
Incoming call and the rechargeable
battery of the headphones is almost
empty
(> 9).
Meaning/headphones
are switched on
are switched off
are connected to device 1 or 2
are not connected via Bluetooth
are in Bluetooth pairing mode
Bluetooth pairing successful
Bluetooth pairing failed
incoming call rejected
call ended
redials the last dialed number
Voice dialing is activated