Channel Setup - Theben LU 101 HF Instruction Manual

Manuale_LU101_105HF
INTRODUCTION
LU 101/105 HF is a transmitter that combines two-way infrared sensor and
wireless feature. To be installed on the door, it can transmit two different
channel signals to Receiver according to different directions. Then
Receiver sends out two different sounds to notify users the visitors'
coming or the family members' going out, also can announce the visitors'
arrival with flash light. In these ways, users can show welcome to guests
timely, conveniently, and politely.
Apart from the features above, Transmitter LU 101/105 HF has other
remarkable functions as following:
• Send out different signals according to the objects detected in different
directions.
• Easy installation on ceiling, wall, table, etc, and simple operation.
• Adjust the detection range by rotating sensor body 90° to right or left.
• Full compatibility with all HF Theben products.
• Wire free and convenient.
• Apply to different locations: offices, small-scaled stores and homes, etc.
CHANNEL SET-UP
16
Transmitter and Receiver communicate each other by having the same
channels. Transmitter LU 101/105 HF has been preset system channel at
"I" before exiting factory. And the unit channel is fixed at "7" and "9".
Please make sure the channel settings of Receiver and Transmitter are
identical. The user can respectively fix the
channel at "7" or "9" according to preference.
Please refer to the arrowhead symbol in the window of transmitter LU
101/105 HF. When object moves toward to "7" symbol, LU 101/105 HF is
activated against unit channel "7" signal. When object moves toward to "9"
symbol, LU 101/105 HF is activated against unit channel "9" signal (See
Fig. 1 and 2) .
Fig. 1
2004.3.3
Unit Unit
channel "9" channel "7"
2:54 PM Page 16
combining receiver unit
Fig. 2
Unit channel
distributes in window
7
9