Developing Estrangement Solenoid; Before Removing The Developing Disengage Solenoid; Removing The Developing Disengage Solenoid - Canon Color imageCLASS MF9170c Service Manual

Chapter 7
Move the drawer connector [1] at the right side to check that the couplings
[2] and the lock [3] of the toner cartridge for the four colors; BK, Y, C, and
M work with each other.
[3]
[2]

7.5.3 Developing Estrangement Solenoid

7.5.3.1 Before Removing the Developing Disengage
Solenoid
imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Remove the ETB unit.(page 7-31)Reference [Removing the ETB Unit]
2) Remove the rear cover unit.(page 10-11)Reference [Removing the Rear
Cover Unit]
3) Remove the right cover.(page 10-11)Reference [Removing the Right
Cover]

7.5.3.2 Removing the Developing Disengage Solenoid

imageCLASS MF9170c / imageCLASS MF9150c / imageCLASS MF8450c
1) Remove the claw [2] to move the cable guide [1] toward the left.
F-7-59
2) Remove the plate [1].
- 3 screws [2]
7-30
3) Disconnect the 2 connectors [1] and free the harness [4] from the harness
guide [2] and the wire saddle [3].
[1]
4) Remove the developing disengage drive unit [1].
- 3 screws [2]
0019-6128
0019-6129
5) Remove the plate [1].
- 3 screws [2]
6) Remove the 2 developing disengage solenoids [1].
- 2 screws [2]
F-7-60
F-7-61
F-7-62
F-7-63