Horizontal Stitching - Brother NX-600 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Horizontal Stitching

Horizontal stitching is used to attach appliqués to fabric that cannot be moved around, such as cylindrical
pieces. Straight stitches and zigzag stitches that sew to either the left or right are available.
Stitch Name Pattern
Horizontal
straight stitch
Horizontal
zigzag stitch
The illustration below shows the sewing order for
the following explanation.
a Remove the flat bed attachment.
• For details, refer to "Stitching cylindrical
pieces" (page 42).
b Attach monogramming foot "N".
• For details, refer to "Replacing the presser
foot" (page 37).
c Select stitch
• For details, refer to "Selecting stitching" (page
66).
Application
68 Attaching appliqués to sleeves
(straight stitch sewn to the left)
69
Attaching appliqués to sleeves
(straight stitch sewn to the right)
70 Attaching appliqués to sleeves
(zigzag stitch sewn to the left)
71 Attaching appliqués to sleeves
(zigzag stitch sewn to the right)
4
3 1
2
1
.
Stitch Width
[mm (inch.)]
–
–
–
–
d Lower the needle into the fabric at the
beginning of the stitching, and then start
sewing.
Lower the needle at the upper-right corner.
The fabric is fed toward the back of the
machine, as usual.
e After you have sewn to the corner, stop the
sewing machine, and then select stitch
f Start sewing.
The fabric is fed to the right.
g After you have sewn to the corner, stop the
sewing machine, and then select stitch

Horizontal Stitching 105

Stitch Length Presser
[mm (inch.)] Foot
–
–
N
–
–
68
.
1
.