Subnet Mask - Brother NC-100h Network User's Manual

Subnet Mask

This field displays the current subnet mask used by the machine. If
you are not using DHCP or BOOTP to obtain the subnet mask, enter
the desired subnet mask. Check with your network manager for the
subnet mask to use.
(For MFC-410CN, MFC-620CN, MFC-3340CN, MFC-5440CN,
MFC-5840CN)
1 Menu/Set
Press
2 1
Select to change. Enter the Subnet Mask address.
3 Menu/Set
Press
4 Stop/Exit
Press
(For DCP-310CN)
1 Menu
Press
2
Press or
Set
Press .
3
Press or
Set
Press .
4
Press or
Set
Press .
5
Press or
Set
Press .
6
Press repeatedly to enter the first three-digit number for the
Subnet Mask address.
Set
Press .
Repeat this step until you have entered the fourth three-digit
number to complete the Subnet Mask address.
Each number can also be increased / decreased by holding
down
7 Stop/Exit
Press
5 1 3
, , , . (
.
.
.
to select 3.LAN.
to select 1.Setup TCP/IP.
to select 3.Subnet Mask.
1
to select to change.
or .
.
4 1 3 for
, , MFC-5440CN)
FRONT PANEL SETUP 3 - 7