1
About this Printer
What is in the box?
When you unpack the printer, make sure that you have all of the following parts.
Quick Setup Guide
Interface cable
The interface cable is not a standard accessory. Purchase the appropriate cable for the interface you are
using.
USB cable
Please make sure you use a USB 2.0 interface cable that is no longer than 6 feet (2 meters).
DO NOT connect the interface cable at this time. Connecting the interface cable is done during the printer
driver installation process.
When you use a USB cable, make sure you connect it to the USB port of your computer and not to a USB
port on a keyboard or non-powered USB hub.
Third party USB ports are not supported for Macintosh
Network cable (HL-2150N / HL-2170W only)
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast
Ethernet Network.
Printer
Drum unit and starter
CD-ROM
toner cartridge
®
.
AC power cord
assembly
1
1
1
1
1