Configuring Your Printer For A Wireless Network; Using The Brother Automatic Installer Application In The Cd-Rom To Configure Your Wireless Network Printer; Using Secureeasysetup Tm To Configure Your Printer In A Wireless Network - Brother HL-5270DN Network User's Manual

Configuring your wireless network printer (HL-5280DW only)

Configuring your printer for a wireless network

There are three methods to configure your wireless network printer; by using the automatic installer
application in the CD-ROM (recommended), using the SecureEasySetup
panel.
Using the Brother automatic installer application in the CD-ROM to configure
your wireless network printer
We recommend that you use the Brother automatic installer application in the CD-ROM we have provided
with the printer. For installation in infrastructure mode (recommended), please follow the instructions in the
supplied Quick Setup Guide, and for installation in ad-hoc mode, see Wireless installation in ad-hoc mode
(HL-5280DW only) in Chapter 10.
Using SecureEasySetup
TM
The SecureEasySetup
By pushing a button on the wireless router or access point, you can send the wireless network and security
settings to the printer. Your router or access point must also support SecureEasySetup
guide for your wireless LAN router or access point for instructions on how to use the SecureEasySetup
feature of that device.
Note
Routers or access points that support SecureEasySetup
product.
1
Place your Brother printer close to the access point (Less than 5 m/16 feet).
2
Push the SecureEasySetup
your wireless router or access point for instructions.
TM
to configure your printer in a wireless network
is an easy way to configure your Brother device to your wireless network settings.
TM
button on your wireless router or access point. See the user's guide for
TM
software and the printer control
TM
will have the following logo displayed on the
TM
. See the user's
TM
3 - 4
3