4.3 General wiring XLS
J11
4.4 MoNet bus connection
A6V10407862_e_en_--
P4/P5
local Ethernet
Figure 9: Wiring overview of XLS components
●
The Ethernet switch (modular) is supplied via the PSC-12 power supply,
connection TB4.
●
The internal Ethernet connection is established between port 4 or port 5 on the
Ethernet switch (modular) and the PMI-2, connection J11.
Preparing the Ethernet switch (modular) for MoNet bus connection
Figure 10: Breaking out the MoNet bus cover plate
l
Use a screwdriver to carefully remove the cover plate for the MoNet connector as
shown in the illustration.
a Levering the screwdriver in the direction shown by the arrow causes the cover
plate to come loose at the four predetermined breaking points.
TB4
non power limited
DC 24 V OUT
POWER
A+, A-
Wiring
4
General wiring XLS
15 | 32