Brother MFC-P2500 User Manual page 77

2.
Place the drum unit assembly on a flat, horizontal surface, and pull the toner
cartridge out of the drum unit assembly while holding down the lock lever
with your right hand .
Note
Discard the used drum unit according to local regulations. If you are not
sure of them, consult your local dealer/retailer. Be sure to seal up the drum
unit tightly so that toner powder does not spill out of the unit. Do not
discard used drum units together with domestic waste.
We recommend that you place the drum unit on a piece of cloth or
disposable paper in case you accidentally spill or scatter toner.
Handle the toner cartridge carefully as it contains toner. If toner scatters
and your hands or clothes get dirty, wipe or wash it off with cold water
immediately.
3.
Unpack the new drum unit.
!
Caution
Wait to unpack a drum unit immediately before you are ready to install it
into the printer. If an unpacked drum unit is subjected to excessive direct
sunlight or room light, the unit may be damaged.
Handle the drum unit carefully. If toner scatters on your hands or clothes,
wipe or wash it off with cold water immediately.
Fig. 3-13 Removing the Toner Cartridge
3-11
CHAPTER 3 MAINTENANCE
Hold down this lock
lever