Brother MFC-820CW Quick Setup Manual page 24

STEP 2
Installing the Driver & Software
10
Disconnect and then reconnect the power cord
to turn the machine OFF and back ON. This will
allow the machine to automatically acquire the
correct TCP/IP address information from your
access point (router) if DHCP is enabled
(DHCP is normally enabled as default for most
access point routers).
If your access point does not have DHCP
enabled you will need to manually configure
the IP address, subnet mask and gateway of
the machine to suit your network. See the
Network User's Guide for details.
Wireless setup is now complete. A four
level indicator on the bottom of your
machine's LCD starts to show the
wireless signal strength of your access
point or router. To install the MFL-Pro
Suite Software, continue to step 11.
11
Turn on your computer.
Close any applications running before installing
the MFL-Pro Suite.
Note
Before installation, if you are using personal
firewall software, disable it. Once you are sure that
you can print after the installation, restart your
personal firewall software.
12
Put the supplied CD-ROM into your CD-ROM
drive. If the model name screen appears,
choose your machine. If the language screen
appears, choose your language.
13
The CD-ROM main menu will appear. Click
Install MFL-Pro Suite.
Note
• If this window does not appear, use Windows
Explorer to run the setup.exe program from the
root folder of the Brother CD-ROM.
22
• If you see the following screen, click OK to install
the Windows
installed your PC may restart. Then the installation
will automatically continue.
If the installation does not continue automatically,
open the main menu again by ejecting then
reinserting the CD-ROM disc or double-click the
setup.exe program from the root folder, and
continue from Step 13 to install the MFL-Pro
Suite.
14
Choose Wireless Network Connection, and
then click Next.
15
Choose Driver Install Only, and then click
Next.
16
After reading and accepting the ScanSoft
PaperPort
Yes.
17
The installation of PaperPort
®
automatically start and is followed by the
installation of MFL-Pro Suite.
Windows
®
updates. After the updates are
®
9.0SE License Agreement, click
®
9.0SE will
®
®