Lcd Screen; Basic Operations - Brother MFC-5890CN User Manual

Chapter 1

LCD screen

The LCD shows the current machine status
when the machine is idle.
5
1 Wireless Status (MFC-5895CW and
MFC-6490CW)
A four level indicator shows the current
wireless signal strength if you are using a
wireless connection.
0
2 Memory Status
Lets you see the available memory in the
machine.
3 Ink indicator
Lets you see the available ink volume.
4 Current Receive Mode
Lets you see the current receive mode.
 Fax (Fax only)
 F/T (Fax/Tel)
 TAD (External TAD)
 Mnl (Manual)
5 Faxes in memory
Shows how many received faxes are in the
memory.
Note
(MFC-6490CW)
If you receive a fax containing multiple paper
sizes (for example, a Letter size page and a
Ledger size page), the machine may create
and store a file for each paper size. The LCD
may show that more than one fax job has been
received.
8
1
1 2 3 4
Mem. Mem.
Fax Fax
12:45 12:45
12.21.2009 12.21.2009
Max

Basic Operations

The following steps show how to change a
setting in the machine. In this example the
Mode Timer setting is changed from
2 minutes to 30 seconds.
a
Press Menu.
b
Press a or b to choose
General Setup.
c
Press OK.
d
Press a or b to choose Mode Timer.
e
Press d or c to choose 30Secs.
General Setup
Mode Timer
Tray Setting
Volume
Auto Daylight
PwrOff Setting
MENU
Press OK.
You can see the current setting on the
LCD:
General Setup
Mode Timer
Tray Setting
Volume
Auto Daylight
PwrOff Setting
MENU
f
Press Stop/Exit.
1
30Secs
Off
Fax Receive : Off
Select & Press OK
30Secs
Off
Fax Receive : Off
Select & Press OK