NuTone LOSONE SELECT L1500C Specification Sheet

LOSONE SELECT
CEILING MOUNT VENTILATORS
L900EX, L900C, L1500EX, L1500C
Incredibly reliable. Unbelievably quiet. Offering
the CFM choices you need at the lowest sound
levels in the industry.
FEATURES
GRILLE:
•
Conceals interior
•
Low profile styling blends with any decor
•
Metal, finished with white painted enamel
BLOWER:
•
Low RPM for quiet operation
•
Resilient anti-vibration mounts
•
Dynamically-balanced, polymeric, centrifugal blower
wheel for quiet, efficient performance
•
Permanently lubricated, thermally protected motor
•
Plug-in motor rated at ("EX" models - 240 VAC),
("C" models - 277 VAC)
•
Designed for continuous operation
HOUSING:
•
Rugged, 20 gauge galvanized steel
•
1/2" acoustic insulation inside
•
May be installed in ceiling or wall (size permitting)
•
8-position mounting brackets for easy installation
and greater adaptability to various mounting
requirements
•
Automatic backdraft damper located within duct
connector
•
Factory-shipped in horizontal discharge position for
8" x 12" ductwork
•
May be converted to vertical discharge
•
May be installed as an in-line ventilator with addition
of accessory kit Model 983L (purchase separately)
ACCESSORIES (purchase all separately):
•
Model 57V (Ivory) / 57W (White) Electronic Variable
Speed Control
•
Model 59V (Ivory) / 59W (White) 60-Minute Time
Control
Broan-NuTone LLC, 926 West State Street, Hartford, Wisconsin 53027 (1-800-637-1453)
Broan-NuTone Canada, 1140 Tristar Drive, Mississauga, Ontario, L5T 1H9 (1-888-882-7626)
REFERENCE QTY.
®
ACCESSORIES (continued):
•
•
•
•
•
TYPICAL SPECIFICATION
Ventilator shall be Broan Model L900EX, (L900C),
(L1500EX), (L1500C).
Ventilator shall have galvanized steel housing insulated
with at least 1/2" of acoustic insulation. Housing to have
adjustable mounting brackets.
Automatic backdraft damper to be located within duct
connector. Duct connector, blower assembly and wiring
plate shall be adjustable for either horizontal or vertical
installation.
Blower unit shall be removable from housing and will
have a polymeric, centrifugal-type blower wheel. Motor
to be permanently lubricated and mounted with resilient
anti-vibration mounts. RPM not to exceed number
listed for each model.
Air delivery shall be no less and sound levels no greater
than listed for each model. All air and sound ratings
shall be certified by AMCA. Units to be UL and cUL
listed.
REMARKS
SPECIFICATION SHEET
Model 61V (Ivory) / 61W (White) 15-Minute Time
Control
Model 71V (Ivory) / 71W (White) 12-Hour Time
Control
6-Amp, Electronic Variable Speed Controls
Model 75V (240 VAC), Model 277V (277 VAC)
Model T81212 Transition (8" x 12" to 12" round)
Model RD3 Radiation Damper
"Broan-NuTone LLC certifies that
the models shown herein are
licensed to bear the AMCA Seal.
The ratings shown are based on
tests and procedures performed
in accordance with AMCA
Publication 211 (and AMCA
Publication 311 if sound is also
certified) and comply with the
requirements of the AMCA
Certified Ratings Program"
Project
Location
Architect
Engineer
Contractor
Submitted by Date
50G 99043125B