Controls; Main Switch; Operating Accgsc1 Controller - NuTone GSEH3K User Manual

2. CONTROLS

2.1 M S
AIN WITCH
All units are equipped with a 3-position main switch, located on the front panel. The
unit is intented for use with a wall controller (provided, see below). The main switch
is to remain in either the "OFF" or "Normal/Remote" modes ONLY. The "Normal/Remote"
mode allows the homeowner to operate the product from the wall controller (supplied
with the unit), typically mounted near a thermostat or other convenient location.
OFF:
U
NIT IS OFF AND
DOOR IS
.
UNLOCKED
2.2 O
PERATING
2.2.1 ACCGSC1 C
P
OWER INDICATOR
LIGHTS UP WHEN SLIDE
SWITCH IS IN THE
L
OW POSITION
F
ILTER MAINTENANCE
INDICATOR
FLASHES EVERY MINUTE TO
INDICATE IT IS ON DUTY
FLASHES EVERY SECOND
WHEN IT IS TIME TO
REPLACE PREFILTER
LED STAYS LIT WHEN IT IS
TIME TO REPLACE FILTER
AND PREFILTER
2.2.2 U
SING
• OFF: To stop the unit, slide the button on this position.
• L : For a day-to-day usage, slide the button on this position.
OW
The unit then will operate on low speed, providing 70 cfm.
• H : For a high speed operation, slide the button on this position.
IGH
Generally used when more ventilation is required, such as parties,
smokers, or for a 6-bedroom house. This mode provides 105 cfm.
VC0053
ACCGSC1 C
ONTROLLER
ONTROLLER
:
H
IGH OR
.
:
.
.
VC0059
.
O
NCE THE MAINTENANCE DONE
MAINTENANCE INDICATOR BY CAREFULLY INSERTING A SMALL
ROD
FOR
WILL TURN OFF
RECOMMENDATIONS IN
ACCGSC1 C
ONTROLLER
D
ESCRIPTION
Power
High
Low
OFF
Filter Maintenance
Reset Filter
R
ESET FILTER HOLE
( . .:
E G PAPER CLIP
1 . T
SECOND HE FILTER MAINTENANCE INDICATOR
. R
EFER TO THE
- 5 -
NORMAL/REMOTE:
U
NIT IS OPERATING ON
. T
LOW SPEED
CORRECT POSITION
WHEN THE WALL
CONTROLLER IS USED
BOOST:
U
NIT IS OPERATING
ON HIGH SPEED
H
IGH
U
NIT IS OPERATING AT
ITS HIGH SPEED
Low:
U
NIT IS OPERATING AT
ITS LOW SPEED
OFF:
U
NIT IS OFF
:
,
RESET THE FILTER
) R F
IN THE ESET
F M
ILTER
S 3.
ECTION
HIS IS THE
.
.
:
.
.
.
,
ILTER HOLE
AINTENANCE