Page 1
Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact the John Lewis Helpline. This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
Page 2
Fittings and parts checklist JCBC M6 X 25mm Bolt x 2 M4 Allen Key x 1 JCBC M6 X 70mm Bolt x 8 M5 Allen Key x 1 Washer M6 x 8 Centre Plastic Cap x 15 Side Plastic Cap x 30 Headboard x 1 Footboard x 1 Side Rails x 2...
Page 3
Step by step assembly instructions Step One Place Legs (6) over the holes on the underside of the Headboard (1) and Footboard (2) as per below drawing. Insert M6 x 70mm Bolts (F) and Washer M6 (G) to fix each leg in place and tighten using Allen Key M4 (A) provided.
Page 4
Step Three Lower the Centre Rail (5) into the brackets in the centre of the Headboard (1) and Footboard (2). Push down fully and secure in place using M6 x 25mm Bolt (E) and tighten with Allen Key M4 (A). You can now tighten the bolts at the Side Rails from previous step (Step Two) so all fastenings are now tightened.
This product complies with BS EN 1725:1998. If you require any additional information or have any issues with this product please call the John Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com John Lewis Partnership 171 Victoria Street, London, SW1E 5NN.
This manual is also suitable for:
803/45301803/45401803/45501803/45202803/45302803/45402...
Show all
803/45502Owen bed double 803/45201Owen bed double 803/45301Owen bed double 803/45401Owen bed double 803/45501Owen bed king 803/45202Owen bed king 803/45302Owen bed king 803/45402Owen bed king 803/45502