Advertisement
Quick Links
John Lewis
Double
Stock code white: 803/45201
black: 803/45301
grey/taupe: 803/45401
brown: 803/45501
Thank you for purchasing this Owen Bed. Please read the instructions carefully before use to ensure safe
and satisfactory operation of this product.
PRE-ASSEMBLY PREPARATION
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of components is
given in this leaflet. If any components are missing, please contact the John Lewis Helpline.
This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN
LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 40 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.
If you require any additional information or have any issues with this product please call the
John Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com
Owen Bed
1/6
King
Stock code white: 803/45202
black: 803/45302
grey/taupe: 803/45402
brown: 803/45502
For product support or spare parts please call
the John Lewis Helpline;
E: mail@fwgroup-uk.com
T: 01244 689949
Advertisement
Related Manuals for John Lewis 803/45201
Summary of Contents for John Lewis 803/45201
- Page 1 Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact the John Lewis Helpline. This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
- Page 2 Fittings and parts checklist JCBC M6 X 25mm Bolt x 2 M4 Allen Key x 1 JCBC M6 X 70mm Bolt x 8 M5 Allen Key x 1 Washer M6 x 8 Centre Plastic Cap x 15 Side Plastic Cap x 30 Headboard x 1 Footboard x 1 Side Rails x 2...
- Page 3 Step by step assembly instructions Step One Place Legs (6) over the holes on the underside of the Headboard (1) and Footboard (2) as per below drawing. Insert M6 x 70mm Bolts (F) and Washer M6 (G) to fix each leg in place and tighten using Allen Key M4 (A) provided.
- Page 4 Step Three Lower the Centre Rail (5) into the brackets in the centre of the Headboard (1) and Footboard (2). Push down fully and secure in place using M6 x 25mm Bolt (E) and tighten with Allen Key M4 (A). You can now tighten the bolts at the Side Rails from previous step (Step Two) so all fastenings are now tightened.
- Page 5 Step Five This bed is now ready to use.
-
Page 6: Care And Maintenance
This product complies with BS EN 1725:1998. If you require any additional information or have any issues with this product please call the John Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com John Lewis Partnership 171 Victoria Street, London, SW1E 5NN.