Care And Maintenance - Bushnell EQUINOX X650 Owner's Manual

SETTINGS MENU REFERENCE
SUB MENU (CATEGORY)
Night Vision
Camera Setup
Gallery
Display Settings
Exit Settings
WARNING: DO NOT WALK, RUN, OR USE ANY FORM OF TRANSPORTATION (BICYCLE, MOTORCYCLE, AUTOMOBILE, ETC.)
WHILE VIEWING THROUGH THE EQUINOX X650, AS THIS MAY PREVENT YOU FROM BEING FULLY AWARE OF YOUR
SURROUNDINGS, INCLUDING ANY POTENTIAL OBSTACLES OR OTHER DANGERS IN YOUR PATH. USE ONLY WHILE
STATIONARY, NEVER WHEN IN MOTION.

CARE AND MAINTENANCE

Your Bushnell Equinox X650 was designed to provide many years of reliable service. To ensure that you get the most
enjoyment out of your digital night vision device, follow these recommendations, guidelines and precautions:
 Keep the device away from any heating and air conditioning vents or other heating devices, direct sunlight, and
moisture.
 Always store the unit in its carrying case in a dry well ventilated space in temperature above +15°C (60° F) and
below +48°C (118° F). Do not store near heating devices. Do not store in direct sunlight or high humidity conditions
(higher than 70 %).
 Clean the optical lens with camera lens cleaning supplies.
 Clean the exterior of the device with a soft clean cloth.
 Remove the batteries if the device will not be used for longer than a few weeks.
 Avoid dropping or otherwise shocking the unit. Although designed for rugged outdoor use, this device
incorporates sophisticated digital circuitry which could be damaged in extreme cases of misuse.
 Do not open the body of the device or otherwise attempt to service this device.
 Never pour alcohol or any other liquids directly onto the lens surfaces.
 Do not clean lenses and unit surfaces with paper based products, such as newspaper, textbook paper, etc. as it can
damage the coating.
 Do not attempt to remove the eyepiece as the LCD display could become damaged.
 Do not leave the device in direct sunlight or rain. The unit is water resistant, but is not designed for prolonged
exposure to moisture and cannot be submerged in water.
 After the unit is operated in temperatures below zero, wait at least 3 hours at room temperature, to avoid
condensation accumulating on the internal lens surfaces and the consequent fogging caused by extreme
temperature differences.
6
OPTIONS/ITEMS DESCRIPTION
IR Illumination Set infrared illuminator level or IR light
Recording Mode Select photo or video image capture
Setup Date
Set current date for video timestamp
Setup Time
Set local time for video timestamp
Bushnell Watermark
Enable/disable watermark stamp on
photos/videos
n/a Review photos, playback videos, delete
unwanted files.
Day Brightness
Select viewing brightness for daytime
Night Brightness
Select viewing brightness for night
Display Time
Enable/disable displayed time
n/a
Exit all menus, return to normal viewing
(default factory settings indicated in bold)
SETTINGS
Photo, Video
use Keypad+Select buttons
use Keypad+Select buttons
On, Off
1 ~ 15 (8)
1 ~ 15 (8)
On, Off
Press Select button to exit