Installing The M.2 Solid-State Drive Conversion Plate - Dell Latitude 3420 Service Manual
Computers with integrated graphics
Hide thumbs
Also See for Latitude 3420:
- Owner's manual (78 pages) ,
- Setup and specifications (23 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
About this task
The following image indicates the location of the M.2 solid-state drive conversion plate and provides a visual representation of
the removal procedure.
Steps
1. Remove the two (M2x3) screws that secures the solid-state drive conversion plate to the system board.
2. Lift and remove the solid-state drive conversion plate from the solid-state drive slot on the system board.
Installing the M.2 solid-state drive conversion plate
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the M.2 solid-state drive conversion plate and provides a visual representation of
the installation procedure.
30
Removing and installing components
- Quick Links:
- Removing the Base Cover
- Memory Module
Hide quick links:
Advertisement
Table of Contents
