Advertisement
ENTERING STATIONS INTO PRESET MEMORY
1.
Manually tune to desired station.
store preset
Press and hold the
2.
a beep confirmation.
The display will show the preset station number in the upper left
3.
corner of the display.
Stations will store in the order that they were entered into
4.
Note:
memory, regardless of whether they are FM or AM stations.
LISTENING TO PRESET STATIONS
AM>FM>Presets
1.
Push
button until the word "Presets" is displayed.
Turn the tuning knob to the preset you wish to listen to.
2.
CLEARING STATIONS FROM PRESET MEMORY
Push the
button to engage Presets mode.
1.
AM>FM>Presets
2.
Turn the tuning knob to the preset you wish to clear.
clear
preset
Press and hold the
3.
a beep confirmation. When a station is cleared from memory, the
Radio will mute until the tuning knob is turned again.
Holding the
4.
Note:
clear preset
ALL the preset stations. You will hear three quick beeps to confirm
an "all clear" operation.
DISPLAY MODE (STATION FREQUENCY/CLOCK TIME)
WHEN POWER IS ON
The Radio normally displays the station frequency when the power is
on. To recall the clock time:
1.
To recall the clock time, tap the
displayed for five seconds
2.
To change the default display mode from station frequency to
clock time (or vice versa), press and hold the
until you hear a beep confirmation (about three seconds).
When power is off, the Radio always displays the current clock
3.
time, even if the default display mode when the power is on is
the station frequency.
BRIGHT/DIM DISPLAY MODE
The bright display mode is the default setting.
dim
Push the
button to change the display from bright
1.
to dim; push again to change it back.
SETTING THE WAKE-UP ALARM
Alarm
1.
Press the
(or
Alarm 2
1
desired alarm mode—one press for music, two presses for buzzer,
three presses for music + buzzer.
button a fourth time will disable the alarm. The display will indicate
if an alarm is set and its mode of operation. In the music +
buzzer mode, the Radio plays for 5 minutes, turns off, and then
the buzzer comes on.
Press the
button above the
2.
The time display will flash.
3.
While the time display is flashing, turn the tuning knob to the
desired wake-up time.
Note:
has no indication.
button for 1 second until you hear
button for 1 second until you hear
button for 10 seconds will clear
Display
button. The time will be
button
Display
) button repeatedly to choose the
Pressing the
Note:
Alarm
(or
) button.
Alarm 1
Alarm 2
PM is indicated on display; AM
DISPLAYING THE WAKE-UP ALARM TIME
1.
When an alarm is set, tap the
or
button to check the respective alarm time set-
Alarm 1
Alarm 2
ting. The alarm time will flash in the display for 5 seconds, then
the display will revert to its normal readout (either current clock
time or radio frequency if the Radio power is on, or current
clock time if the Radio power is off).
TURNING OFF THE ALARM WHEN IT IS SOUNDING
1.
To turn off the alarm, press the
the top or front of the Radio. The alarm will remain set to go off
at the same time the next day.
To disable the alarm completely, press the
2.
button repeatedly until the "Alarm" indicator is no longer visible in
the display.
USING THE SNOOZE FUNCTION
1.
When the alarm sounds, push the
to silence the alarm for 10 minutes.
2.
If the
Snooze/sleep
button is pushed again within 3 seconds of
the first push, 5 minutes will be added to snooze time, up to a
maximum of 60 minutes. Example: If the button is pushed rapidly
three times, the Radio will go into snooze mode for 20 minutes
(10 + 5 + 5 minutes).
Once the Radio is in snooze mode, tapping the
3.
button will display the remaining snooze time, counting down. The
display will then revert to normal after 5 seconds.
USING THE SLEEP FUNCTION
When listening to the Radio, this function turns the Radio off automat-
ically after a predetermined time.
When the Radio is playing normally (no alarm is sounding), hold
1.
the
button down for 1 second.
Snooze / sleep
2.
The word
Sleep
is shown in the display, and the time 60:00 is
shown temporarily.
Each additional press of the
3.
remaining sleep time in 10-minute increments, to the nearest 10
minutes. Example: If there are 59:48 minutes remaining in sleep,
pressing the button once will reduce the sleep time to 50 minutes,
twice will reduce it to 40 minutes, etc.
DISPLAYING THE REMAINING SLEEP TIME
While the Radio is in sleep mode, press the
1.
once. The remaining sleep time will be temporarily shown in the
display, then the display will revert to its normal readout (either
current clock time or radio frequency, depending on which has
been selected).
button above the appropriate
On/off
On/off
On/off
button on either
(or
Alarm 1
Alarm 2
button once
Snooze / sleep
Snooze/sleep
button will reduce the
Snooze/sleep
Snooze / sleep
button
)
Advertisement
