Replacing The Battery - Brother BCL-D10 User Manual

Chapter 4

Replacing the battery

If your battery performance is getting worse,
make sure that you have charged the battery
correctly. If the battery performance is still
poor, it is time to replace it.
WARNING
Use a genuine Brother rechargeable
battery (BCL-BT10). If not, it may cause
damage or personal injury.
CAUTION
DO NOT take off the white plastic that
covers the battery.
a
Press the area indicated (1) on the
battery cover (2) and slide it off the
cordless handset.
1
b
Remove the old battery and pull out the
connector.
c
Insert the connector (1) of the new
battery (2) in the direction shown below.
25
4
2
2
1
d
Place the battery in the correct position.
e
Slide the battery cover back on.
Note
• Be careful that you do not catch the
battery connector cord.
• After replacement, you should set the date
and time. (See Date and
Time on page 20.)
f
Charge the battery for 12 hours. (See
Charging the battery on page 24.)