Programs, Speed Setting & Uses; Troubleshooting Guide - Ninja BL641C Owner's Manual

PROGRAMS, SPEED SETTING AND USES
FOR THE PITCHER
FUNCTION BLADE TYPE
Processing
Chopping Stacked Blade
Frozen Drinks/
Stacked Blade
Ice Crush
Pureeing Stacked Blade
* When blending soups or sauces, make sure they're cooled to room temperature first -
Ninja containers are not intended for hot blending.
®
PROGRAMS, SPEED SETTINGS AND USES
FOR THE NUTRI NINJA® CUP
FUNCTION BLADE TYPE
Pro Extractor
Smoothies
Blades™ Assembly
Green Pro Extractor
Smoothies Blades Assembly
Pro Extractor
Grating
Blades Assembly
Pro Extractor
Chopping
Blades Assembly
IMPORTANT: Do not run the appliance over 4 minutes at a time to prevent overheating
of the appliance.
* When blending sauces and soups, make sure they're cooled to room temperature first –
Ninja ® containers are not intended for hot blending.
CAUTION: DO NOT process dry ingredients without adding liquid to the cup.
This product is not intended for dry blending.
16
SPEED OR PROGRAM TYPE OF FOOD
Auto-IQ® Purée Dips
Medium Batters
Salsa
Auto-IQ Pulse Vegetables
Nuts
Ice,
Auto-IQ Frozen
Frozen Drinks
Drinks/Smoothies
Smoothies
Smoothies Soups*
Auto-IQ Food Puree
Milkshakes
SPEED OR PROGRAM TYPE OF FOOD
Smoothies
Frappes
Nutri Ninja Auto-iQ Blend
Milkshakes
Protein Drinks
Frozen Fruits
Frozen Vegetables
Kale
Nutri Ninja Auto-iQ Blend
Celery
Spinach
Seeds
Ice
Grated Cheese
Auto-iQ Pulse High
Bread Crumbs
Spices
Salsa
Auto-iQ Pulse High Vegetables
Nuts

TROUBLESHOOTING GUIDE

WARNING: To reduce the risk of shock and unintended operation,
turn power off and unplug unit before troubleshooting .
Motor Doesn't Start or Blade Assembly Doesn't Rotate .
• Make sure the container is securely placed on motor base.
• Make sure the lid is securely on container in the correct position (align arrows).
• The appliance is turned "Off". Press the power button ( ) to turn "On".
• Check that the plug is securely inserted into the electrical outlet.
• Check the fuse or circuit breaker.
• The unit has overloaded. The appliance will stop and the power light will flash. Unplug
and wait approximately 15 minutes before using again.
• The unit has overheated. Unplug and wait approximately 15 minutes before using again.
• Check to make sure the unit is not overloaded.
Food is Unevenly Chopped .
• Either you are chopping too much food at one time, or the pieces are not of even size
and processing smaller amounts per batch.
Food is Chopped Too Fine or is Too Watery .
• The food has been over processed. Use Auto-iQ® Pulse button for controlled processing.
Food Collects On Lid or On the Sides of the Container .
• The mixture is too thick. Add more liquid.
You Cannot Achieve Snow From Solid Ice .
• Do not use ice that has been sitting out or has started to melt. Use ice straight from
the freezer.
• Start with a few pulses and then go to a continuous blending cycle.
Motor Base Won't Stick to Counter or Table Top .
• Make sure surface and suction feet are wiped clean. Suction feet will only stick to
smooth surfaces. Suction feet WILL NOT stick on some surfaces such as, wood, tile and
non-polished finishes.
• DO NOT attempt to use appliance when the motor base is stuck to a surface that is not
secure, (cutting board, platter, plates, etc.).
You get an "Err" Message .
• Your Ninja® is able to detect which jar is on the base. You may be trying to use a
program that is not designed for the jar you have installed. The programs will light up
indicating which programs are available for each jar.
You have a blinking red light .
• The unit is not installed properly. For your safety the unit will only be able to be turned
on when it is properly assembled. Please refer to the assembly pages of this inspiration
guide for assistance.
ninjakitchen.com 17