Setting Audio Mode; Scroll Caption Adjustments - Boss Audio Systems BV8250 User Manual

Basic Operation
Balance: R 0-10 to L 0-10 .
Adjust sound balance between left
and right speakers by using VOL + / -
-
Fader: F 0 10 to R 0 -10 .
Adjust sound balance between front and
rear speakers by using VOL + / VOL - .
Setting Audio Modes
Touch the screen the DSP range
DSP
(or press the EQ/LOUD button
on the remote ) to select one of
the preset sound modes .
(Rock/Pop/Jazz/Classic/Flat) .
The information will display in the
monitor as follow :
POP ROCK
FLAT
DVD 11-0:44:36
LUD SWF POP
SWF LUD DSP
RDM INT RPT
touch to select
It`s depend on your habit to select the
Audio mode .
Scroll Caption Adjustment
In Radio mode:
You can adjust your desired scroll
caption , the method of the operation
as follow:
A). Press and hold the SETUP button
(for about 2 seconds) on the remote
control, the adjustment scroll bar will
display on the screen .
B). Use the VOL+/- to select among of
the "A, B, C ....X, Y, Z, and blank ", and
use the / button on the front panel
JAZZ
CLASSIC
DISC
11:08
TA AF
CLK
OSD
to ahead/back (proceed/cancel) , and
then press the SETUP button briefly to
confirm .
.
FM1 106.30
ST
LUD
(Please note : press the button longer
again to renew it . )
Reset Factory Settings
RESET button is placed on the housing
and must be activated with either a
ballpoint pen or thin metal object.
The RESET button is to be activated for
the following reasons:
A. Initial installation of the unit when
all wiring is completed.
B. All the function buttons do not operate.
C. Error symbol on the display.
18
MHz
DX TA
SWF POP
DISC 11:08
RESET