Installing/Removing Modules - Siemens SIMATIC NET RX1500 Manual

Introduction
1.3 Installing/Removing Modules
1.3

Installing/Removing Modules

Always refer to the Installation Manual for the host device RUGGEDCOM RX1500
for instructions on how to install or remove a power or line module. The Installation
Manual cites important, chassis-specific safety warnings that should be followed to
avoid damage to the module and/or device.
Additional installation/removal instructions may also be provided in this Catalog for
select modules. Make sure to review all information provided for a module before
installing or removing it.
18
RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16