Monitor/Dvd Player; Remote Control - Boss Audio Systems BV10.4 Owner's Manual

Features and Controls

Remote Control

1 POWER
Turns the DVD Player/Monitor on or off.
MUTE
2
Press this button to switch off the
audio during playback. Press again
to restore the audio.
3 Auto TV (not function in this unit)
UP/DOWN/RIGHT/LEFT ARROWS
(not function in this unit)
A/V SELECT
DVD AV1 AV2
MENU (OSD on monitor)
Press this button to open the on-
screen menu system to setup and
control various parameters of the
monitor and DVD player.
UP/DOWN
Use to move to the desired menu.
P/N
This button permits you to choose
among Multi, PAL and NTSC.
MODE
Use this button to switch between
three modes
DVD SD USB
MENU (DVD menu)
This button permits you to view the
menu on the DVD.
SUBTITLE
Use this button to select the menu
for choosing a subtitle language.
TITLE (Title menu)
When a DVD is playing, press this
button to view the Title Menu.
DISPLAY
Press to show elapsed or remaining
time of a chapter or a title.
PBC (Video CD only)
Press this button to access the special
Playback Control functions for VCD
2.0 format Video CD S.
NUMERIC button
Use when making a selection on the
menu screen.
RETURN
Press this button to return root menu.
SETUP
Press this button to display the Setup
menu. The Setup menu enables you
to enter the settings required for the
unit to work properly.
REPEAT
Press this button to change the playback
mode to repeat, and to select the repeat
mode.
8
Installation
1. Open the package and check that these items are presents.
INSTALLATION PLATE
2. Connect the external compoments to the RCA cable or AV output.
(Refer to the connection diagram on page 32)
3.Match the position of installation bracket and
4. Tighten the unit with the supplied
screw B.
UNIT
SCREW A
installation plate with screw A.
33
SCREW B