Disassemble The Npm-10 Transceiver; Preparation For Disassembly; Disassembly Tools; Esd Protection - Nokia NPM-10 Series Disassembly/Assembly

CCS Technical Documentation

Disassemble the NPM-10 Transceiver

Preparation for Disassembly

Disassembly Tools

Shown left to right: Torque-limiting screwdriver (torque set at 28N-cm), fiberglass sol-
dering aid, and T6 Torx+ driver.

ESD Protection

Some form of ESD protection should be used when handling the PWB and other elec-
tronic components. The photo above shows a wrist strap, which can be grounded to a
bench. This or some other form of ESD protection should be used when handling the
phone.

Assembly

Use the Disassembly Instructions, which follow, in the reverse order.
Issue 1 03/2003
Nokia Corporation
Disassembly/Assembly
Confidential
NPM-10
Page 5