Table of Contents
Advertisement
Maintenance Mode
10 External input setting
■ Click on [Settings] then [External input].
(1) External input (Indoor unit - Outdour unit)
1. Select the External input No.. (1 is for the highest priority and 8 is for the lowest priority)
2. Select the unit.
3. Click on [Edit].
4. Modify the setting.
5. Click on [OK].
• When registering multiple External Input, repeat the steps 1 to 5.
6. Click on [Done].
NOTE:
1. To cancel the setting, click on [Cancel] after selecting the unit and then click on [Done].
2. When multiple units are selected at the same time, the setting value of the smallest unit is indicated.
③
30
Management Mode
< This item is not required but set if necessary for install location. >
①
Control Mode
②
④
⑤
⑥
P5416904
Advertisement
Table of Contents
