Table of Contents
Advertisement
When the time comes to an end, the
sound operates and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch
CountUp Timer
You can use this function to monitor how long the
cooking zone operates.
To set the cooking zone: touch
again until the indicator of a necessary cooking
zone comes on.
To activate the function: touch
comes on. When the indicator of the cooking
zone starts to flash slowly the time counts up. The
display switches between
(minutes).
To see how long the cooking zone operates:
set the cooking zone with
cooking zone starts to flash quickly. The display
shows how long the zone operates.
To deactivate the function: set the cooking zone
with
and touch
cooking zone goes out.
Minute Minder
You can use this function as a Minute Minder
when the hob is activated and the cooking zones
do not operate. The heat setting display shows
To activate the function: touch
of the timer to set the time. Cooking zones
display deactivates automatically after 10 seconds.
When the time comes to an end, the sound
operates and 00 flashes.
To stop the sound: touch
To deactivate the function: activate for a short
time and deactivate left front cooking zone.
The function has no effect on the
operation of the cooking zones.
PAUSE
This function sets all cooking zones that operate to
the lowest heat setting.
The function does not stop the timer functions.
Touch
to activate the function.
comes on. The heat setting is lowered to 1.
To deactivate the function, touch
previous heat setting comes on.
12
.
again and
of the timer.
and counted time
. The indicator of the
or
. The indicator of the
. Touch
.
. The
If you change the heat setting, the
function stops and the display shows
the new heat setting.
LOCK
You can lock the sensors on the hob while cooking
zones operate.
Set the heat setting first.
To activate the function: touch
for 4 seconds. The Timer stays on.
To deactivate the function: touch
previous heat setting comes on.
When you deactivate the hob, you also
deactivate this function.
CHILD SAFETY DEVICE
This function prevents an accidental operation of
the hob.
To activate the function: the hob must be
deactivated. Touch
flashes. Touch
To deactivate the function: the hob must be
deactivated. Touch
flashes. Touch
To override the function for only one cooking
.
time: activate a cooking zone.
or
for 4 seconds until
Set the heat setting in 4 seconds. You can
operate the hob. When you deactivate the
appliance the function operates again.
OFFSOUND CONTROL (DEACTIVATION AND
ACTIVATION OF THE SOUNDS)
Deactivate the hob. Touch
for 3 seconds.
the timer to choose one of the following:
•
- the sounds are off
•
- the sounds are on.
To confirm your selection wait until the hob
deactivates automatically.
When the function is set to
sounds only when:
•
Minute Minder comes down
•
Count Down Timer comes down
•
you put something on the control panel.
.
for 4 seconds until
.
comes on for 4 seconds.
for 4 seconds until
.
comes on for 4 seconds.
comes on. Touch
comes on for all zones.
for 3 seconds. Touch
or
comes on. Touch
you can hear the
comes on
. The
of
Advertisement
Table of Contents
