EN | Safety
Intended use
The product is used to query sensor data in electric and hybrid vehicles, for example, the:
•
Rotor position sensor
•
Temperature sensor
•
"Cover open sensor" on the traction motor
The product is not used to test that the circuit is de-energized.
Use only the plug connections on the vehicle that the manufacturer has specified in the
guided fault finding.
In this operating manual, vehicle manufacturers are exclusively defined as vehicle
manufacturers in the Volkswagen Group.
Any use beyond what is listed here is prohibited.
Requirements for the target group
Only qualified personnel may work with this product!
In this operating manual, qualified personnel is defined as personnel meeting all
requirements for working on motor vehicles and their diagnostics systems that are
applicable in the country of operation, as defined by:
•
Regulations applicable in the country of operation
•
Specifications from the vehicle manufacturer and/or the operator.
At all times while using the product, staff must wear the personal protective equipment
prescribed by the vehicle manufacturer for work on motor vehicles and their diagnostics
systems.
Duties of the operator
The operator is responsible for ensuring that all staff working with the adapter cable fulfills
the requirements for the target group.
Furthermore, the operator is responsible for ensuring the following:
•
The adapter cable is always in perfect working order.
•
The regular inspection intervals for the adapter cable are observed and recorded.
32.VW.2210.0563_BA_V00_EN
VAS 5579
7