Chapter 2: Hardware Installation
The following details the hardware installation procedure for ASUS Mimic
CX200 IP camera.
Section 1. Installation Procedure (Without PoE Injector)
1. Connect the Power Adaptor to the mini
USB port.
2. Connect the LAN cable to a router.
3. Wait a moment and the LCD will display
the IP Address, Subnet and Gateway. Use a
Browser to log into ASUS Mimic CX200 Web
Interface.
The
icon on the LCD shows that a USB
camera is connected.
1. Connect power and LAN cable into the PoE
Data In port.
Next connect ASUS Mimic CX200 LAN cable to
the PoE Data Out port.
2. Wait a moment and the LCD will display
the IP Address, Subnet and Gateway. Use a
Browser to log into ASUS Mimic CX200 Web
Interface.
The
icon on the LCD shows that a USB
camera is connected.
ASUS CX200 Internet Camera
1
2
3
1
2