Lorex N844 Series Quick Setup Manual page 21

To manually activate the warning light and/or siren features:
Prerequisite: Connect to your recorder using the Lorex Home app, see 'Remote viewing' pg.23.
1. Launch the Lorex Home app and tap your NVR to view connected channels.
2. Tap a connected smart deterrence camera to open it in single-channel view.
3. Tap to activate the warning light, or tap
To activate deterrence features on all connected cameras, push and hold the front panel
panic button on the NVR for 3 seconds.
Note: For full instructions on using the deterrence features, refer to the NVR's manual on
your product page at lorex.com.
to activate the siren.
18