Sylvania ValueLED Installation Manual
  1. Manuals
  2. Brands
  3. Sylvania Manuals
  4. Lantern
  5. ValueLED
  6. Installation manual

Sylvania ValueLED Installation Manual

Hide thumbs
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Download this manual
SYLVANIA Luminaires
Installation Guide
ValueLED™Garage
For warranty coverage, please register at www.sylvania.com/warrantyregistration.
PLEASE READ ALL INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION
• TO PREVENT PERSONAL INJURY OR PRODUCT DAMAGE ONLY LICENSED ELECTRICIANS SHOULD
PROVIDE ALL INSTALLATION SERVICES.
• TO AVOID ELECTRIC SHOCK OR COMPONENT DAMAGE DISCONNECT POWER BEFORE ATTEMPTING
INSTALLATION OR SERVICING.
• DO NOT USE A GENERATOR TO TEST THIS LUMINAIRE
• THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE (NEC)
AND ALL APPLICABLE FEDERAL, STATE AND LOCAL ELECTRIC CODES AND SAFETY STANDARDS.
• USE CAUTION WHEN HANDLING THIS PRODUCT DURING OR AFTER OPERATION AS IT MAY BECOME
HOT AND CAUSE BURNS. DISCONNECT PRODUCT AND ALLOW COOLING PRIOR TO SERVICING.
• ANY ALTERATION OR MODIFICATION OF THIS PRODUCT IS EXPRESSLY FORBIDDEN AS IT MAY
CAUSE SERIOUS PERSONAL INJURY, DEATH, PROPERTY DAMAGE AND/OR PRODUCT MALFUNCTION.
• TO PREVENT PRODUCT MALFUNCTION AND / OR ELECTRICAL SHOCK THIS PRODUCT MUST BE
PROPERLY GROUNDED.
• DISCONNECT POWER BEFORE ATTEMPTING INSTALLATION / MAINTENANCE
• THIS LUMINAIRE IS DESIGNED TO OPERATE IN AMBIENT TEMPERATURES RANGING FROM -22°F TO
+104°F (-30°C TO +40°C).
The Garage luminaires are environmentally
preferable LED alternatives to traditional HID
luminaires, offering up to 81% in energy
savings. Ideal in place of traditional luminaires,
or as new installations, the ValueLED Garage
series is offered in three wattages/lumen
packages for use in garages, canopies, and
mid bay general lighting.
3989108

Advertisement

Table of Contents
loading

Related Manuals for Sylvania ValueLED

Summary of Contents for Sylvania ValueLED

  • Page 1 LED alternatives to traditional HID luminaires, offering up to 81% in energy savings. Ideal in place of traditional luminaires, or as new installations, the ValueLED Garage series is offered in three wattages/lumen packages for use in garages, canopies, and mid bay general lighting.

  • Page 2: Wiring Diagram

    IMPORTANT: READ CAREFULLY BEFORE INSTALLING THE FIXTURE. RETAIN FOR FUTURE REFERENCE. GENERAL: Upon receipt of the fixture, thoroughly inspect for any freight damage which should be brought to the attention of the delivery carrier. WIRING DIAGRAM PENDANT MOUNTING: Disassemble the driver box cover by removing the 4 hex head screws keeping them for later. Figure 1 Loosen and remove the 3/4 plug on the top of the driver box cover.

  • Page 3: Surface Mounting

    SURFACE MOUNTING: Disassemble the driver box cover by removing the 4 hex head screws keeping them for later. Figure 1 Loosen and remove the 3/4 plug on the driver box cover. Figure 2 Drill 4 holes on the ceiling at 90 degrees from each other on along the circumference of circle of 84mm (3.3”) diameter. Figure 3 Fix the driver box cover to the ceiling with the appropriate hardware (provided by others).

  • Page 4: Adjusting The Color Temperature

    ADJUSTING THE COLOR TEMPERATURE : • The correlated color temperature of ValueLED™ Garage luminaire can be adjusted by toggling between the switch located on the inside of the luminaire. Use the sliding switch to select the desired correlated color temperature.

  • Page 5: Cleaning And Maintenance

    ADJUSTING THE DAYLIGHT / MOTION SENSOR SETTINGS : CLEANING AND MAINTENANCE • To maintain the fixture efficacy occasional cleaning of the outer lens surface may be needed. • Use a mild soap or detergent, which is essentially neutral pH (pH approximately 6 to 8), nonabrasive, and which contains no chlorinated or aromatic hydrocarbons.
  • Page 6 à DHI et offrent des économies énergétiques allant jusqu’à 81%. Convenant parfaitement au remplacement de luminaires traditionnels ou dans les nouvelles installations, la série ValueLED Garage est disponible en trois plages de puissances/lumens pour utilisation dans les garages, auvents et éclairage général à...

  • Page 7: Schéma De Câblage

    IMPORTANT : LIRE ATTENTIVEMENT AVANT D’INSTALLER LE LUMINAIRE. GARDER POUR RÉFÉRENCES FUTURES. GÉNÉRAL : lors de la réception du luminaire, inspecter le produit et s’assurer qu’aucun dommage n’est survenu pendant l’expédition, aviser immédiatement le transporteur si vous constatez des dommages. SCHÉMA DE CÂBLAGE Green/Yellow Vert/jaune...
  • Page 8 INSTALLATION EN SURFACE : Démonter le couvercle de la boîte du pilote en retirant les 4 vis à tête hexagonale, les garder pour plus tard. Figure 1 Desserrer et retirer les connecteurs 3/4 sur le dessus du couvercle de la boîte du pilote. Figure 2 Percer 4 trous sur le plafond à...

  • Page 9: Réglage De La Température De Couleur

    RÉGLAGE DE LA TEMPÉRATURE DE COULEUR : • La température de couleur proximale du luminaire ValueLED Garage s’ajuste en alternant entre les niveaux sur l’interrupteur logé à l’intérieur du luminaire. À l’aide de l’interrupteur coulissant, choisir la température de couleur proximale désirée.

  • Page 10: Nettoyage Et Entretien

    RÉGLAGE DE LA LUMIÈRE DU JOUR / CAPTEUR DE MOUVEMENT : Zone de détection La zone de détection peut être réduite en choisissant la combinaison des interrupteurs DIP pour répondre aux besoins de chaque application. Réglage à l’usine : I Temps de retenue Référence à...

Table of Contents