Making A Call - BlueTrek ST1 User Manual

Switching the BLUETREK ST1® headset ON and OFF
To switch on:
When your headset is o , press and hold the "TALK/ON/OFF" button
seconds until the blue indicator light is on. A beep (2 tones) can be heard through the
speaker then release the button.
To switch o :
When your headset is on, press and hold the "TALK/ON/OFF" button
until the red indicator light is on after the quick blue ashes. A beep (2 tones) can be heard
in the speaker. Release the "TALK/ON/OFF" button

Making a call

Note: The voice dialing feature is not available on all mobile phones or PDAs. However, you
can always dial directly using your phone keypad. If your mobile phone does o er the voice
recognition feature, you can make a call directly from the headset without touching your
Bluetooth® mobile phone.
Mobile phones with voice dialing
Make sure that the voice dialing functions on your phone are activated and that your voice
tags have been recorded. To program these, please refer to your phone manual.
Press the "TALK/ON/OFF" button
audio connection is established.
.
1
(when there is no incoming and no active call). An
1
for about 3
1
for about 7 seconds
1
8