Bearing [M50·60·71Da(L) Model Only]; Heat Exchanger - Mitsubishi Electric SEZ Series Technical & Service Manual

[ VIII DISASSEMBLY PROCEDURE ]
6. Bearing [M50·60·71DA(L) model only]
1. Removing the bearing
(1) Remove the two fixing screws on the bearing
cover (K) to remove it.
(2) Remove the two bearing retainer screws to
remove the bearing.

7. Heat exchanger

1. Remove the drain pan according to the proce-
dure in section 3.
2. Remove the heat exchanger cover according to
the procedure in section 4. 2.
3. Removing the cover
(1) Remove the two fixing screws on the cover (L)
to remove it.
4. Removing the Heat exchanger
(1) Remove the fixing screws on the heat
exchanger (M) to remove it.
HWE21010
Exercise caution when removing heavy parts.
Fig. 13
Fig. 14
(L)
Fig. 15
Fig. 16
- 48 -
(K)
(M)
GB