Table of Contents
Advertisement
3
When the BLUETREK® DUO Stereo is switched off, press
and hold the TALK button for about 7 seconds until the
indicator light flashes red and blue alternately. And a sound
can be heard in the speaker.
4
Once the mobile phone detects the headset, a "BLUETREK DUO Stereo" message will be
displayed. Follow the phone instructions to accept the pairing. The PIN code (or passkey) is
0000, then press "yes" or "ok" .
5
For some phones, you may need to select "Connect" .
BLUETREK DUO STEREO
If you haven't started the discovery mode within 5 minutes, the headset will go to the standby
mode. You must then switch off your headset and start the pairing again.
If pairing was successful, the indicator light will switch to blue and flashes slowly.
The headset will connect automatically to the mobile phone.
5 I BLUETREK DUO Stereo
BLUETREK DUO STEREO
BLUETREK DUO STEREO
"0000"
"Talk" button
BLUETREK DUO STEREO
Connect
Assign short name
Set as unauthorised
Delete
Select
Cancel
Advertisement
Table of Contents
