Setting The Alarm Time - Sangean ProTravel PT50 Operating Instructions Manual

02 Yacht Boy 50, GB 19.08.2003
_______________________________________________________________
SETTINGS
Setting 12 or 24 hour format
1 12/24
Press »
– Display: »

Setting the alarm time

The alarm time is always set in local time »
select the alarm signal (radio station or signal tone).
1 ALARM
Press »
– Display: »
2
While »
ALARM
signal tone (»
– Display: »
3
Hold down »
4
Set the hours for the alarm time using »
5 ALARM SET
Press »
– Display: »
14:27 Uhr Seite 31
« to switch between 12 and 24 hour clock format.
« or » « for 12 hour format.
AM PM
«. Before you set the alarm time, you must
HOME
«.
« flashes.
ALARM
ALARM
« is flashing, press » « to select the radio alarm (»
«).
« or » « flashes for two seconds and then remains lit.
ALARM SET
« until the alarm time flashes in the display.
HR.
« and the minutes using »
« to confirm the setting.
« or » «.
ALARM - - ALARM
«) or
MIN.
«.
10