CompuSTAR 2WR5R-SF Quick Start Card

Rechargeable Battery: Your 2WR5R-SF
is equipped with a rechargeable battery.
Use the included FT-USB CHARGER
to charge your remote. We recommend
charging your remote before first use.
Charge time is approximately 2 hours.
Register online at www.compustar.com
within 10 days of purchase to activate
your new remote's warranty.
2WR5R-SF_QuickCard line 20200814.indd 1
QUICK START CARD
QUICK START
BUTTTON
Hold this button for 4 seconds to power up the remote.
4 seconds
Tap button 1 time to lock and/or arm your system.
Double tap button to unlock and/or disarm your system.
x 2
Hold button for 2.5 seconds to activate OR cancel the remote start sequence.
2.5 sec
LED QUICK START
LED ICON
Will flash when transmitting to idicating the lock/arm command has been sent.
Will flash + chirp confirming the system has been locked/armed.
Will flash when transmitting to idicating the unlock/disarm command has been sent.
Will flash + chirp confirming the system has been unlocked disarmed.
Will flash indicates the remote start command has been sent.
Will flash + chirp confirming the system has been remote started/stopped.
Will flash + chirp will sound when the remote recieves an alarm trigger alert.
All 4 icons will flash during remote start to act as a runtime count down timer.
Each icon represents 25% of the runtime and will stop flashing as timer counts
down starting with the lock LED. The remote will beep 3 times when 1 minute of
runtime left. During the last minute of runtime the remote will beep 1 time/2 seconds.
8102REUCL002300 // 2WR5R Guide REV1.0
FUNCTION DESCRIPTION
DESCRIPTION
2WR5R-SF
Firstech, LLC. | 1
2020/08/14 10:20:21