Using a nanoSIM or microSD Card
This terminal supports nanoSIM cards and microSD cards.
To use WAN functions, a SIM card must be installed.
Installing the nanoSIM/microSD card
1. Turn the terminal off (shut it down). (The terminal must be shut down.)
2. Flip back the nanoSIM/microSD card tray cover.
Fit the eject pin into the hole in the card tray and then push it into the hole.
3. Remove the nanoSIM/microSD card tray.
4. Load the nanoSIM card or microSD card into the nanoSIM/microSD card tray.
5. Install the nanoSIM/microSD card tray in the terminal and close the cover.
20
Card tray hole