Advertisement
1.
4x
M6x8mm Buttonhead
Screw
2.
Set Toeside Stance Angles
Angles in 3° increments
Prime Instructions_A05
Production Splitboard Installation
6x
M6x10mm Buttonhead Screw
Use M6x8mm Buttonhead
for thin core boards
Riser Positions:
-Prime Connect: All the way back
-Prime SL: All the way back
-Prime-X: All the way forward
Preset Angles:
Front Foot: 30° max, -10° min
Back Foot: 10° max, -30° min
Left
For greater than 10° on Back Foot
A. Remove Hardware
B. Flip Angle Plates
C. Reinstall Hardware
Right
Angle Plate
PAGE 2 OF 6
Advertisement
