Remove The Hinge; Remove The Hinge Flex Cable - Nokia 2255 Disassembly/Assembly

2255 (RM-97)
Disassembly/Assembly

9. Remove the Hinge

Grasp the hinge assembly with both hands as shown and pull the hinge away from the
A/B-cover assembly to unsnap the hinge pin.
Caution: Do not separate the two assemblies after the hinge is opened.

10. Remove the Hinge Flex Cable

Note: Prior to separating the two assemblies, free the flex cable through the flex
access slot.
Using tweezers, lift the hinge bumper from the inner side of the C-cover to allow the flex
to slide through, allowing the two halves of the hinge assembly to be separated.
Page 8
©2005 Nokia Corporation
Company Confidential Issue 1 10/2005