Sony NEX-VG20 Handycam&reg Handbook page 78

 Off
Disables wind noise reduction.
On ( )
Enables wind noise reduction.
Audio Mode
You can change the recording sound
format.
5.1ch Surround (
Records sound in 5.1ch surround.
 2ch Stereo ( )
Records sound in 2ch stereo.
Audio Rec Level
You can adjust the volume when recording.
Reset
Returns to the normal level.
Tips

We recommend that you use headphones to

check the level when adjusting the setting.
Set a lower level to naturally capture continuous

loud sound. To capture quieter sound at an
easy-to-hear level, increase this setting.
The limiter is always working regardless of the

Audio Rec Level setting.
Guide Frame
You can display the frame and check that
the subject is horizontal or vertical.
The frame is not recorded.
 Off
Does not display the guide frame.
On
Displays the guide frame.
)
US

Tips

Positioning the subject at the cross point of the

guide frame makes a balanced composition.
The outer frame of [Guide Frame] shows the

display area of a TV which is not compatible
with full pixel display.
Zebra
You can display a zebra pattern as a guide
for adjusting brightness. The zebra pattern
will not be recorded with the image.
 Off
Does not display the zebra pattern.
70 ( )
Displays the zebra pattern over the part of
an image that exceeds the brightness level of
about 70 IRE.
100 ( )
Displays the zebra pattern over the part of
an image that exceeds the brightness level of
about 100 IRE.

Note
With a subject that exceeds a brightness level of

100 IRE, the image may become overexposed.
Tips

IRE (Institute of Radio Engineers) is a measure

of the video signal level that is used as the bases
of brightness; the reference level (pedestal
level) is set to 0 (%) and the maximum level
(completely white level) is set to 100 (%).
Peaking
 On/Off
When you select [On],
appears and you can display an image
on the screen with its outlines enhanced. This
function helps you to adjust the focus. The
default setting is [Off].
Color
You can select peaking color from [White],
[Red] and [Yellow]. The default setting is
[White].
/ /