Sony Handycam HDR-UX10 Operating Manual page 108

What you can do with Windows computer (Continued)
• Do not connect anything to other USB
ports of a computer.
• When connecting to a computer with a
USB keyboard and USB mouse connected
as standard equipment, connect your
camcorder to another USB port using the
USB cable.
b Notes
• Operations are not guaranteed when multiple
USB devices are connected to a computer.
• Be sure to connect the USB cable to a USB port.
If the USBcable is connected to a computer via
a USB keyboard or USB hub, operations are not
guaranteed.
To disconnect the USB cable
1 Click the [Unplug or eject hardware]
icon on the task tray on the bottom right
of the desk top.
2 Click [Safely remove USB Mass
Storage Device].
3 Click [OK] (Windows 2000 only).
4 Touch [END] on the screen of your
camcorder.
5 Touch [YES] on the screen of your
camcorder.
6 Disconnect the USB cable from your
camcorder and the computer.
b Notes
• Do not disconnect the USB cable while the
ACCESS lamp/access lamp is lit.
108
• Before turning off your camcorder, disconnect
the USB cable following the proper procedures
described above.
• Disconnect the USB cable using the proper
procedures described above. Otherwise, files
stored on the media may not be updated
correctly. Also, disconnecting the USB cable
improperly may cause a malfunction of the
media.