Sony Handycam HDR-FX1 Operating Instructions Manual page 35

Item Adjustment
[SKINTONE To make wrinkles less
DTL] noticeable by suppressing the
outlines on the part of skin
color to be enhanced.
[TYPE1] (the color range
recognized as a skin color is
narrow) to [TYPE3] (the color
range recognized as a skin
color is wide)
In the case of [TYPE3], the
effect may also be applied to a
color that is not a skin color.
[OFF]: no adjustment
[AE SHIFT] –7 (darker) to +7 (lighter)
[AGC LIMIT] Select the upper limit for the
gain ([OFF], 12dB, 6dB,
0dB).
[OFF] is 18dB.
[AT IRIS Select the highest aperture
LMT] value for the automatic
adjustment (F11, F6.8, F4).
[WB SHIFT] –7 (to make white parts
bluish) to +7 (to make white
parts reddish)
[AWB SENS] To set the auto white balance
operation under a reddish light
source such as an
incandescent lamp or candle,
or under a blueish light source
such as in outdoor shade.
[HIGH] (reddishness or
blueishness is reduced) to
[LOW] (reddishness or
blueishness is increased)
[AWB SENS] is not effective
under a clear sky or the sun.
[CINEMA- [ON]: Pictures are recorded
TONE γ]
with the gamma curve that
reproduces the natural
gradation sequence, similar to
that of film cameras.
Item Adjustment
[CINE- [CINEFRAME 30]:
FRAME] Pictures are recorded with a
cinema-like atmosphere. This
produces the feel of
smoothness better than
[CINEFRAME 24].
[CINEFRAME 24]:
Pictures are recorded with the
atmosphere of 24 frames per
second adopted by film
recording.
[OFF]: normal recording
[COPY] To copy a picture profile
setting to other picture
profiles.
[RESET] To restore the default setting
of the picture profile.
6
Repeat steps 4 and 5 to adjust other
items.
7
Select [ RETURN] by turning the
SEL/PUSH EXEC dial, then press the
dial.
8
Select [OK] by turning the SEL/PUSH
EXEC dial, then press the dial.
A picture profile indicator appears.
To cancel the picture profile recording
Select [OFF] in step 2, then press the SEL/
PUSH EXEC dial.
To check the picture profile settings
During recording or in the standby mode, press
STATUS CHECK (p. 24).
To copy the picture profile setting to
other picture profiles
1
Press PICTURE PROFILE.
2
Select the number of the picture profile
to be copied from by turning the SEL/
PUSH EXEC dial, then press the dial.
3
Select [SETTING] by turning the SEL/
PUSH EXEC dial, then press the dial.
,continued
35
Recording