Recording Media - Sony HDR-CX560V Handycam&reg Handbook

(Warning indicator pertaining to
memory card)
Slow flashing
Free spaces for recording images are running

out. For the type of memory card you can use
with your camcorder, see page 22.
No memory card is inserted (p. 22).

Fast flashing
There are not enough free spaces for recording

images. After storing the images on other
media (p. 61), delete unnecessary images, or
format the memory card (p. 89).
The image data base file may be damaged.

Check the data base file by touching
(MENU)  [Setup]  [
 [Repair Img. DB F.]  the recording
medium.
The memory card is damaged.

(Warning indicators pertaining to
memory card formatting)
The memory card is damaged.

The memory card is not formatted correctly

(p. 89).
(Warning indicator pertaining to
incompatible memory card)
Incompatible memory card is inserted (p. 22).

 (Warning indicator pertaining to
the write-protect of the memory card)
The memory card is write-protected.

Access to the memory card was restricted on

another device.
(Warning indicator pertaining to the
flash)
Fast flashing
There is something wrong with the flash.

(Media Settings)]
US
10
(Warning indicator pertaining to
camera-shake warning)
The amount of lights is not sufficient, so

camera-shake easily occurs. Use the flash.
The camcorder is unsteady, so camera-shake

easily occurs. Hold the camcorder steady with
both hands and record the image. However,
note that the camera-shake warning indicator
does not disappear.
(Warning indicator pertaining to
photo recording)
The recording media is full.

Photos cannot be recorded during processing.

Wait for a while, then record.
When [ REC Mode] is set to [Highest

Quality ] or [60p Quality
capture photos while recording movies.
Furthermore, if [ Frame Rate] is set to
[24p], you cannot record photos while the
camcorder is in movie recording standby
mode.
Tips

You may hear a melody when some warning

indicators appear on the screen.
Description of warning messages
If messages appear on the screen, follow the
instructions.

Recording media

Cannot recognize the internal memory.
Format and use again.
The internal recording medium of the

camcorder is set differently from the default
format. Performing [Format] (p. 89) may
enable you to use your camcorder. This
will delete all data in the internal recording
medium.
], you cannot