Changing the language setting
You can change the on-screen displays to show messages in a specified language.
[Setup] [
Select
To turn off the power
Close the LCD screen.
To adjust the angle of the LCD panel
First open the LCD panel 90 degrees to the
camcorder (), and then adjust the angle
().
To turn off the beep sound
[Setup] [
Select
Notes
The recording date, time and condition are recorded automatically on the recording media. They are not
displayed during recording. However, you can check them as [Data Code] during playback. To display
[Setup] [
them, select
To set the date and time again: [Date & Time Setting] (p. 63)
To calibrate the touch panel: [Calibration] (HDR-CX200/CX210/PJ200) (p. 72)
General Settings] [Language Setting] a desired language.
90 degrees (max.)
180 degrees (max.)
General Settings] [
Playback Settings] [Data Code] [Date/Time].
90 degrees to the camcorder
] [Off].
Beep
US