D-Link DAP-1720 Quick Install Manual page 4

There are two easy ways to set up your DAP-1720.
It is recommened that you use Method One if your router has a WPS
button. If your router does not support WPS or you are not sure, see
Method Two, Configure the DAP-1720 Using QRS Mobile Setup, on page 6.
Method One: Connect to Your
Find an available outlet near your wireless
1
router. Plug in the DAP-1720 and wait until
the Status LED is blinking amber.
2
Press the WPS (Wi-Fi Protected Setup)
button on your wireless router.
3 Within one minute, press the WPS button
on the DAP-1720. The Status LED will start
to blink green.
4
Router Using WPS
DAP-1320
DAP-1720 Install Guide