Lenovo 100w Gen 3 User Manual page 35

• Do not touch the contact edge or circuit board of the M.2 solid-state drive. Otherwise, the M.2 solid-state
drive might get damaged.
• Do not make the M.2 solid-state drive subject to physical shocks or vibration. Put the M.2 solid-state drive
on a soft material, such as cloth, to absorb physical shocks.
For access, do the following:
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 25.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn the computer over.
4. Remove the base cover assembly. See "Base cover assembly" on page 26.
Note: If your M.2 solid-state drive comes with a thermal pad, peel off it from the M.2 solid-state drive and
attach it to the new M.2 solid-state drive.
Removal procedure
.
Chapter 5 CRU replacement
29