Table of Contents
Advertisement
❒
LNB power supply on/off
LNB Spg.
1
In order to change the LNB power supply setting,
press the
the main menu.
LNB LO 1
LNB LO 2
LNB LO 3
LNB LO 4
LNB Spg
TXT = Exit
2
Use the
line to select between "14/18 V" (on) and "Aus" (off).
❒
Contrast (video amplitude)
Kontrast
The satellites broadcast the signals with different
video amplitude. This results in a corresponding
contrast setting on the receiver.
The correct contrast levels are preset at the factory.
If necessary or in the case of new programming,
1
you can select 3 factory preset contrast levels with
the
x c
A fourth contrast level is provided for rare cases
where the levels 1 to 3 do not allow for an optimum
setting.
The value of the selected contrast level is indicated
between brackets.
14
:
14/18 V
key when in the "LNB LO" line of
.
MENUE
:
9,750
GHz
:
9,750
GHz
:
10,600
GHz
:
11,475
GHz
:
14/18 Volt
0 . . 9
rot = pos/neg
keys when in the "LNB Spg." menu
x c
:
1 (37)
keys.
pos
pos
2
pos
pos
3
OK = Store
4
5
❒
1
!
The values of the levels 1 to 3 should only be
altered if the programme positions preset with
these levels require this. The contrast of these pro-
gramme positions then will be changed.
To change the value of a preset contrast level pro-
ceed as follows:
Select the "Kontrast" line in the main menu.
Press the
key to display the following sub-
.
MENUE
menu.
Kontrast
1 : 16
Kontrast
2 : 22
Kontrast
3 : 37
Kontrast
4 : 16
TXT = Exit
Use the
keys to change the contrast value.
x c
The TV picture in the background is displayed with
the changed contrast setting.
You can only change the entry in the line in which
the contrast level is assigned to the selected pro-
gramme position. It is not possible to change other
lines.
Press
O
to store the setting.
Audio settings
AUDIO
:
1 (7.02 St)
Using the
keys, you can select between 32
x c
audio settings.
The audio settings 1 to 23 are preset at the factory
(see table on next page).
If possible, you should not change these audio set-
tings as this would change the audio settings of all
programme positions having the same preset value.
OK = Store
Advertisement
Table of Contents
