Summary of Contents for OneRemote RIAA DIN-II
- Page 1 OneRemote RIAA DIN-II RIAA Pre-amplifier For Bang & Olufsen Turntables, With or without Datalink Control. User Manual 30012730u1uk OneRemote - www.oneremote.dk...
-
Page 2: Table Of Contents
Content Introduction ................................3 RIAA ..................................3 Bang & Olufsen Datalink Controlled Turntables ....................4 Plug & Play ................................5 Available Cables ..............................6 OneRemote - www.oneremote.dk... -
Page 3: Introduction
The OneRemote RIAA DIN-II amplifier corrects the frequency response as described below and amplifies the PU signal to line level. The OneRemote RIAA DIN-II amplifier is supplied in a metal cabinet to maintain shielding of the signal, and it is delivered with its own DC power supply. -
Page 4: Bang & Olufsen Datalink Controlled Turntables
DataLink enabling control via a 7-pin DIN connected Bang & Olufsen audiomaster. The OneRemote RIAA DIN-II passes the control data from the B&O device to the record player. Turntables that can be controlled by a B&O remote control, when connected to certain B&O Radios. -
Page 5: Plug & Play
Plug & Play Connect the OneRemote RIAA DIN-II to the selected turntable and amplifier using the correct cables as indicated below and power up with the supplied DC power supply. No programming required! Connect the turntable to the IN socket. -
Page 6: Available Cables
Available Cables OneRemote supplies these cables for use between the OneRemote RIAA DIN-II amplifier and the amplifier/receiver. Part number PH-DLINK 0.5 meter white 39202070 PH-DLINK 1 meter white 39202071 PH-DLINK 3 meter white 39202073 OneRemote - www.oneremote.dk...